AMCO Precision Tool Facilities List
CNC Milling
 |
| 2 | OKUMA HOWA | 4VA - VMC | 4TH AXIS | 33” x 18” x 19” |
| 1 | FADAL | 4020 - VMC | 10,000 RPM | 40” x 20” x 20” |
| 1 | FADAL | 3016 - VMC | 10,000 RPM | 30” x 16” x 20” |
| 1 | SHZOUKA | B-5V - VMC | 4TH AXIS | 27” x 15” x 18” |
| 1 | DYNAMITE | 4500 - VMC | 26” x 15” x 15” | |
| 1 | HAAS | VF2 –VMC | 20 HP | 32” x 16” x 20” |
| 1 | HAAS | MINI MILL | HIGH SPEED | 16” X 12” X 10” |
CNC Turning
 |
|
 |
| 1 | HITACHI SEIKI | HICELL 23 II | 4 AXIS – 22 TOOL | 17” OD x 20” L |
| 1 | DAEWOO | PUMA 350 | 30 H.P. – 12 TOOL | 20” OD x 40” L |
| 1 | HITACHI SEIKI | HT-25G | 20 H.P. – 12 TOOL | 18” OD x 24” L |
| 1 | HITACHI SEIKI | HT-25 | 20 H.P. – 10 TOOL | 18” OD x 24” L |
| 1 | HITACHI SEIKI | HT-23 II | 15 H.P. – 10 TOOL | 16” OD x 20” L |
| 1 | DAEWOO | PUMA 10 | 15 H.P. – 10 TOOL | 17” OD x 18” L |
| 1 | HITACHI SEIKI | 4NE11-600 | 15 H.P. – 12 TOOL | 14” OD x 18” L |
| 1 | HAAS | MINI MILL | GANG TOOLED | 6” OD X 12” L |
E.D.M.
| 3 | FANUC – ROBOCUT OA | WIRE EDM | 12”X - 8”Y - 7”Z |
| 1 | CHARMILLES – ROBOFORM 20A | DIE SINKER | 12”X - 9”Y - 9”Z |
Conventional
A full array of conventional manual machining equipment including:
Bridgeport millers, Brown & Sharp grinders, LeBlonde lathes
A full array of inspection equipment including:
Brown & Sharp GAGE 2000 coordinate measuring machine
30” OGP optical comparator
Brown & Sharp micro-hite
Rockwell hardness tester
Sunnen precision bore gages
Standardized gaging– various micrometer types, pin sets & gage blocks.
